Fiber lasers are divided into two major categories: continuous fiber lasers and pulsed fiber lasers. According to the power size: continuous 5W, 10W, 20W to 400W, 1000W or more; pulse 10W, 15W, 20W, 25W, 30W to 50W. The fiber laser marking machine is the most advanced laser marking equipment in the world. It has the characteristics of good beam quality, small size, fast speed, long working life, flexible installation and maintenance-free. Widely used in integrated circuit chips, computer accessories, industrial bearings, watches, electronic and communication products, aerospace equipment, various automotive parts, home appliances, hardware tools, molds, wire and cable, food packaging, jewelry, tobacco and military matters, etc. Marking of domain graphics and text, as well as high-volume production line operations. Fiber laser, the latest international, most reliable structure, small size (about 410 * 200 * 270mm), low power consumption, no high voltage, no huge water cooling system (only about 300W), high beam quality, close to the ideal beam, USB interface output control, optical scanning galvanometer, high laser repetition rate, high speed and no distortion.
About the two major prevention of fiber laser marking machine
Prevent fiber breakage
The pump source of the laser system and the laser head are connected by an optical fiber, and the user should ensure that the bending diameter of the fiber is greater than 300 mm during use or during transportation. Severe bending will result in fiber breakage and the laser system will not work properly.
Prevent dust pollution
The power supply and the fiber optic inlet of the laser head must be installed with the protective cover provided by the system to prevent external dust from contaminating the internal optical components.
When the optical fiber is not connected to the power supply and the laser head, the protective cover provided with the system must be installed to prevent the end face of the optical fiber from being contaminated. (If the end face of the optical fiber is adhered to dust, the ear of the optical fiber should be blown clean by the ear cleaning. Seriously, wipe it off with a lint-free paper mixed with alcohol and ether). Failure to install a protective cover will contaminate the internal optics and fiber end faces, which will cause the entire laser system to malfunction and lose warranty.