11W UV laser drilling machine for small blind vias of PCB
USAGE
The machine is used in drilling through holes, blind holes of FPC
Precision: Using linear motor, high resolution raster ruler, higher shrinkage compensation and advanced image processing technology, fully guaranteed drilling, cutting accuracy and quality.
High quality: Roundness is good and clean. The top and bottom diameter of hole are consistent. The min via hole diameter is 50um.
Highly intelligent, efficient: Auto-focus, auto-calibrate, auto-position, auto loading and unloading material .
1.High efficiency: Flying drilling technology, table and galvanometer with linkages are applied in machine to improve blind/through holes production.
2.High quality: Adopting imported laser, high-performance galvanometer, higher pulse frequency, higher power peak, more fine cutting path planning.
3.Automactic: There are functions with automatically precision correction, automatical power compesation, automatical focus and automatic correcting movement and high interactivity.
4.Customized: Customizable 250 mm or 500 mm wide RTR automatic loading system and various kinds of software functions.
5.Security: Following standard to d esign and produce machine, to achieve better quality in every steps, long work time without any downtime.
6.Stability: Following standard to d esign and produce machine, to achieve better quality in every steps, long work time without any downtime.
7.Reliability: AOM module is applied to correct power by single pulse sampling, to make drilling quality consistency and reliability.
